ST21Y036
Smar tcard MCU with 36 Kbytes high density EEPROM
Data Brief
Features
ST21Y036 major applications include:
Mobile communications (GSM and CDMA) Java applications
259a.ai
Hardware features
Enhanced 8/16-bit CPU core with 16 Mbytes linear addressable memory 128 Kbytes User ROM 4 Kbytes User RAM 36 Kbytes User EEPROM including 64 Bytes User OTP area: Highly reliable CMOS EEPROM submicron technology 10-year data retention 500,000 Erase/Write cycles endurance typical at 25C 1 to 64 Bytes Erase or Program in 1.5 ms Asynchronous Receiver Transmitter supporting ISO 7816-3 T=0 and T=1 protocols Two 8-bit timers with interrupt capability 1.8V, 3V and 5V supply voltage ranges External clock frequency from 1 up to 7.5 MHz High performance provided by: CPU clock frequency up to 22 MHz External clock multiplier (2x, 3x, and 4x) Current consumption complies with GSM specifications Power-saving Standby state Contact assignment compatible ISO 7816-2 ESD protection greater than 4 kV (HBM)
Micromodule
Wafer
Security features
Monitoring of environmental parameters Protection against faults ISO 3309 CRC calculation block Cryptographic performances(1): Triple DES (with keys loaded): Single DES (with keys loaded): True Random Number Generator Unique serial number on each die Hardware DES accelerator 9.3 s 3.1 s
Development environment
Software development and firmware generation are supported by a comprehensive set of development tools dedicated to software design and validation:
C Compiler Simulator Emulator
1. Typical values at 22 MHz
November 2007
Rev 3
1/4
www.st.com 1
For further information contact your local STMicroelectronics sales office.
Description
ST21Y036
1
Description
The ST21Y036 product is a serial access microcontroller specially designed for costeffective secure mobile applications. It is based on an enhanced STMicroelectronics 8/16-bit CPU core offering 16 MBytes linear addressing space. It is manufactured using an advanced highly reliable ST CMOS EEPROM technology. The device includes a DES accelerator. A serial interface fully compatible with the ISO 7816-3 standard (T = 0 and T = 1) for Smartcard applications is available. A CRC calculation block is also available and is directly accessible by the User. The product architecture is optimized for low power consumption applications. A flexible clock generator module provides increased performance for specific current requirements. Figure 1. ST21Y036 block diagram
RAM
EEPROM
User ROM
ST ROM (Boot software)
DES Accelerator
ST ROM Firewall
Internal Bus
CRC Module
Clock Generator Module CLK
2x 8-bit timers
Security Administrator
True Random Number Generator Vcc
8/16-bit CPU Core
IART
RESET
GND
I/O
579
2/4
ST21Y036
Revision history
1.1
Development environment
Development tools for smartcard products include a complete range of hardware systems and software tools from STMicroelectronics and third-party tool suppliers. The range of tools includes solutions to help you to develop and debug your application and evaluate smartcard products and their peripherals. An Integrated Development Environment (IDE), the STMicroelectronics Visual Debug (STVD), provides a set of tools for developing embedded applications. This interface manages the project configuration, code edition, code generation and program debugging. A Smartcard ICS emulator (SCICS) and simulator are available for developing and validating your application code. All the information needed to generate the application code and personalization will be collected in a delivery file (.DLV extension). This file is created using the Delivery menu of the STMicroelectronics configuration software tool, SCOOL.
2
Revision history
Table 1.
Date 21-Sept-2006 20-Mar-2007 6-Nov-2007
Document revision history
Revision 1 2 3 Initial release. Updated Erase/Write cycles endurance value and Section 1.1: Development environment on page 3. Updated Figure 1: ST21Y036 block diagram on page 2. Changes
3/4
ST21Y036
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved BULL CP8 Patents STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
4/4
|
