STB60N55F3 - STD60N55F3 - STF60N55F3 STP60N55F3 - STU60N55F3
N-channel 55V - 6.5m - 80A - DPAK - IPAK - D2PAK - TO-220/FP STripFETTM Power MOSFET
General features
Type STB60N55F3 STD60N55F3 STF60N55F3 STP60N55F3 STU60N55F3
VDSS 55V 55V 55V 55V 55V
RDS(on) <8.5m <8.5m <8.5m <8.5m <8.5m
ID 80A 80A 42A 80A 80A
Pw 110W
1 3 2
3 2 1
110W 30W 110W 110W
TO-220FP
3 1
IPAK
DPAK
3 1
3
Standard threshold drive 100% avalanche tested
D²PAK
1
2
TO-220
Description
This n-channel enhancement mode Power MOSFET is the latest refinement of STMicroelectronics' unique "Single Feature SizeTM" strip-based process, which has decreased the critical alignment steps, offering remarkable manufacturing reproducibility. The outcome is a transistor with extremely high packing density for low onresistance, rugged avalanche characteristics and low gate charge.
Internal schematic diagram
Applications
Switching application
Order codes
Part number STB60N55F3 STD60N55F3 STF60N55F3 STP60N55F3 STU60N55F3 Marking 60N55F3 60N55F3 60N55F3 60N55F3 60N55F3 Package D²PAK DPAK TO-220FP TO-220 IPAK Packaging Tape & reel Tape & reel Tube Tube Tube
March 2007
Rev 3
1/19
www.st.com 19
Contents
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . .... 6
3 4 5 6
Test circuit
. . .. . .. . .. . .. . .. . .. . .. . .. . .... 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
Electrical ratings
1
Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Value Parameter DPAK/D²PAK TO-220FP TO-220/IPAK 55 20 80 56 320 110 0.73 11 390 -2500 42 30 168 30 0.2 Unit
VDS VGS ID ID IDM (1) PTOT
Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor
V V A A A W W/C V/ns mJ V
dv/dt (2) EAS (3) VISO Tj Tstg
Peak diode recovery voltage slope Single pulse avalanche energy Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Operating junction temperature Storage temperature
-55 to 175
C
1. Pulse width limited by safe operating area 2. ISD < 80A, di/dt < 300A/s, VDD < V(BR)DSS. Tj < Tjmax 3. Starting Tj=25C, Id=32A, Vdd=25V
Table 2.
Symbol
Thermal resistance
Value Parameter DPAK IPAK D²PAK TO-220 TO-220FP Thermal resistance junctioncase max 50 ---100 275 Unit
Rthj-case
1.36 35 ---62.5 300
5 --
C/W C/W C/W C
Thermal resistance junctionRthj-pcb (1) pcb max Rthj-a Tl Thermal resistance junctionambient max Maximum lead temperature for soldering purpose
1. When mounted on FR-4 board of 1inch², 2oz Cu
3/19
Electrical characteristics STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol V(BR)DSS I DSS IGSS VGS(th) RDS(on)
Static
Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250A, VGS= 0 VDS = Max rating, VDS = Max rating,Tc = 125C VGS = 20V VDS= VGS, ID = 250A VGS= 10V, ID= 32A 2 6.5 Min. Typ. Max. Unit 55 10 100
200
V A A nA V m
4 8.5
Table 4.
Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =25V, ID=32A Min Typ. Max. Unit 50 2200 500 25 33.5 12.5 9.5 45 S pF pF pF nC nC nC
VDS = 25V, f = 1MHz, VGS=0
VDD = 27V, ID = 65A VGS =10V (see Figure 15)
1. Pulsed: pulse duration = 300s, duty cycle 1.5%
4/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3 Electrical characteristics
Table 5.
Symbol td(on) tr td(off) tf
Switching on/off (inductive load)
Parameter Turn-on delay time Rise time Test conditions VDD = 27V, ID = 32A, RG = 4.7, VGS = 10V (see Figure 17) VDD = 27V, ID = 32A, RG = 4.7, VGS = 10V (see Figure 17) Min. Typ. 20 50 Max. Unit ns ns
Turn-off delay time Fall time
35 11.5
ns ns
Table 6.
Symbol ISD ISDM
(1)
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 65A, VGS = 0 ISD = 65A, VDD = 30V di/dt = 100A/s, Tj = 150C (see Figure 16) 47 87 3.7 Test conditions Packages DPAK-D2PAKI2PAK-TO-220 TO-220FP Min. Typ. Max. 80 320 42 168 1.5 Unit A A A A V ns nC A
ISD ISDM (1) VSD trr Q rr IRRM
1. Pulsed: pulse duration = 300s, duty cycle 1.5%
5/19
Electrical characteristics STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area for TO-220 D²PAK / IPAK / DPAK Figure 2. Thermal impedance for TO-220 D²PAK / IPAK / DPAK
Figure 3.
Safe operating area for TO-220FP
Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Output characteristics
Figure 6.
Transfer characteristics
6/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3 Electrical characteristics Figure 7. Normalized BVDSS vs temperature Figure 8. Static drain-source on resistance
Figure 9.
Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs temperature
Figure 12. Normalized on resistance vs temperature
7/19
Electrical characteristics STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3 Figure 13. Source-drain diode forward characteristics
8/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
Test circuit
3
Test circuit
Figure 15. Gate charge test circuit
Figure 14. Switching times test circuit for resistive load
Figure 16. Test circuit for inductive load Figure 17. Unclamped Inductive load test switching and diode recovery times circuit
Figure 18. Unclamped inductive waveform
Figure 19. Switching time waveform
9/19
Package mechanical dataSTB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3Package mechanical data
DPAK MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 5.1 6.4 4.7 2.28 4.4 9.35 1 2.8 0.8 0.6 0.2 0 8 0 1 0.023 0.008 8 4.6 10.1 0.173 0.368 0.039 0.110 0.031 0.039 6.6 0.252 0.185 0.090 0.181 0.397 TYP MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.200 0.260 TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 inch
0068772-F
11/19
Package mechanical dataSTB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
TO-251 (IPAK) MECHANICAL DATA
DIM. MIN. A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 0.3 0.95 0.6 0.6 6.2 6.6 4.6 16.3 9.4 1.2 1 0.017 0.019 0.236 0.252 0.173 0.626 0.354 0.031 0.031 2.2 0.9 0.7 0.64 5.2 mm TYP. MAX. 2.4 1.1 1.3 0.9 5.4 0.85 0.012 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.039 MIN. 0.086 0.035 0.027 0.025 0.204 inch TYP. MAX. 0.094 0.043 0.051 0.031 0.212 0.033
H C A C2 L2 D B3 B6 A1 L
= =
3
B5
B
A3
=
B2
=
G
=
E
L1
1
2
=
0068771-E
12/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3Package mechanical data
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 T YP M AX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
13/19
Package mechanical dataSTB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
14/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3Package mechanical data
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Ø
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
G
15/19
Packaging mechanical data
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 -
5
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 16.4 50 22. 4 18. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0. 795 0.645 0.724 1. 968 0.881 BULK QTY 2500 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W
BASE QTY 2500
mm MIN. 6. 8 10.4 1. 5 1. 5 1.65 7. 4 2.55 3. 9 7. 9 1. 9 40
15.7 16.3
inch MIN. MAX . 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0. 059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1. 574
0.618 0.641
MAX . 10. 6 12. 1 1.6 1. 85 7.6 2. 75 4.1 8.1 2.1
16/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
Packaging mechanical
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 24.4 100 30. 4 26. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0795 0.960 1.039 3. 937 1.197 BULK QTY 1000 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MI N. 10. 5 15. 7 1.5 1. 59 1. 65 11.4 4.8 3.9 11.9 1.9 50 0. 25 23. 7 24.3 MAX. 10.7 15.9 1. 6 1.61 1.85 11.6 5. 0 4. 1 12.1 2. 1 i n ch MI N. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
17/19
Revision history
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
6
Revision history
Table 7.
Date 09-Feb-2007 22-Feb-2007 07-Mar-2007
Revision history
Revision 1 2 3 First release Description has been updated The Figure 1, Figure 3, Figure 8 has been changed Changes
18/19
STB60N55F3 - STD60N55F3 - STF60N55F3 - STP60N55F3 - STU60N55F3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
19/19
|
