STP90NS04ZC
N-channel clamped 5m - 80A TO-220 Fully protected SAFeFETTM Power MOSFET
Features
Type STP90NS04ZC
VDSS Clamped
RDS(on) < 6m
ID 80A
Low capacitance and gate charge 100% avalanche tested 175C maximum junction temperature
TO-220
3 1 2
Description
This fully clamped Power MOSFET is produced by using the latest advanced company's Mesh OVERLAY process which is based on a novel strip layout. The inherent benefits of the new technology coupled with the extra clamping capabilities make this product particularly suitable for the harshest operation conditions such as those encountered in the automotive environment. Any other application requiring extra ruggedness is also recommended.
Internal schematic diagram
Applications
Switching applications ABS, solenoid drivers Motor control Dc-dc converters
Order code
Part number STP90NS04ZC Marking P90NS04ZC Package TO-220 Packaging Tube
May 2007
Rev 1
1/13
www.st.com 13
Contents
STP90NS04ZC
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . ... 6
3 4 5
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2/13
STP90NS04ZC
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VDS VDG VGS ID (2) ID
(2)
Absolute maximum ratings
Parameter Drain-source voltage (VGS = 0) drain-gate voltage Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC=100C Drain gate current (continuous) Gate-source current (continuous) Drain current (pulsed) Total dissipation at TC = 25C Derating factor Value 33 (1) 33
(1) (1)
Unit V V V A A A A A W W/C kV kV kV C
20
80 80 50 50 320 280 1.87 8 8 8 -55 to 175
IDG IGS IDM (3) PTOT
VESD(G-S) VESD(G-D) VESD(D-S) TJ Tstg
Gate-source ESD (HBM-C=100pF, R=1.5K) Gate-drain ESD (HBM-C=100pF, R=1.5K) Drain-source ESD (HBM-C=100pF, R=1.5K) Operating junction temperature Storage temperature
1. Voltage is limited by zener diodes 2. Current limited by wire bonding 3. Pulse width limited by safe operating area
Table 2.
Symbol Rthj-case Rthj-amb Tl
Thermal data
Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose Value 0.53 62.5 300 Unit C/W C/W C
Table 3.
Symbol IAS EAS
Avalanche data
Parameter Avalanche current, repetitive or not repetitive (pulse width limited by Tjmax) Single pulse avalanche energy (starting Tj=25C, ID=IAS, VDD=50V) Value 80 750 Unit A mJ
3/13
Electrical characteristics
STP90NS04ZC
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DG IDSS IGSS VGSS VGS(th) RDS(on)
On/off states
Parameter Clamped voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate-source breakdown voltage Gate threshold voltage Static drain-source on resistance Test conditions ID = 1mA, VGS= 0 VDS = 16V VGS = 10V IGS =100A VDS= VGS, ID = 1mA VGS= 10V, ID= 40A 18 2 3 5 Min. 33 1 2 25 4 6 Typ. Max. Unit V A A V V m
Table 5.
Symbol gfs (1) Ciss Coss Crss tr(Voff) tf tc Qg Qgs Qgd RG
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Off voltage rise time Fall time Cross-over time Total gate charge Gate-source charge Gate-drain charge Internal gate resistor Test conditions VDS =15V, ID = 40A Min. Typ. 100 3400 1250 450 230 140 295 100 25 36 14 135 Max. Unit S pF pF pF ns ns ns nC nC nC
VDS =25V, f=1 MHz, VGS=0
VCLAMP=32V, ID=80A, VGS=10V, RG=4.7 (see Figure 18) VDD=20V, ID = 80A VGS =10V (see Figure 19)
1. Pulsed: pulse duration=300s, duty cycle 1.5%
4/13
STP90NS04ZC
Electrical characteristics
Table 6.
Symbol ISD ISDM
(1)
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=80A, VGS=0 ISD=80A, di/dt = 100A/s, VDD= 30 V, Tj=150C (see Figure 23) 55 85 3 Test conditions Min. Typ. Max. 80 320 1.5 Unit A A V ns nC A
VSD(2) trr Q rr IRRM
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5%
5/13
Electrical characteristics
STP90NS04ZC
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area Figure 2. Thermal impedance
Figure 3.
Output characteristics
Figure 4.
Transfer characteristics
Figure 5.
Transconductance
Figure 6.
Static drain-source on resistance
6/13
STP90NS04ZC Figure 7. Gate charge vs gate-source voltage Figure 8.
Electrical characteristics Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
Figure 12. Maximum avalanche energy
7/13
Electrical characteristics Figure 13. Zero gate voltage drain current vs temperature
STP90NS04ZC Figure 14. Typical drain source clamped voltage vs drain current
Figure 15. Typ. drain source clamped voltage vs gate source clamping current
Figure 16. Typ. drain source clamped voltage vs drain current
Figure 17. Gate-source zener diodes: maximum energy dissipation
8/13
STP90NS04ZC
Test circuit
3
Test circuit
Figure 19. Gate charge test circuit
Figure 18. Switching times test circuit for resistive load
Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
9/13
Package mechanical data
STP90NS04ZC
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/13
STP90NS04ZC
Package mechanical data
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
11/13
Revision history
STP90NS04ZC
5
Revision history
Table 7.
Date 04-May-2007
Revision history
Revision 1 First release Changes
12/13
STP90NS04ZC
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
13/13
|
