BUL49D BULB49D
High voltage fast-switching NPN power transistors
Features
High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Ver y high switching speed High ruggedness
1 3 2
1 3 2
TO-220
TO-220FP
Applications
3
Electronic transformers for halogen lamps Flyback and forward single transistor low power converters
D2PAK
1
3 12
I2PAK
Description
The devices are manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability. The devices are designed for use in electronic transformer for halogen lamps.
Figure 1.
Internal schematic diagram
Table 1.
Device summary
Marking BUL49D BUL49DFP BULB49D BULB49D Package TO-220 TO-220FP I2PAK D2PAK Packaging Tube Tube Tube Tape and reel
Order code BUL49D BUL49DFP BULB49D-1 BULB49DT4
June 2008
Rev 3
1/15
www.st.com 15
Contents
BUL49D - BULB49D
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 2.2 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 4 5
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packaging information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2/15
BUL49D - BULB49D
Electrical ratings
1
Electrical ratings
Table 2. Absolute maximum ratings
Value Symbol Parameter D2PAK I2PAK TO-220 VCES VCEO VEBO IC ICM IB IBM Ptot Tstg TJ Collector-emitter voltage (VBE =0) Collector-emitter voltage (IB =0) Emitter-base voltage (IC =0, IB <2 A, tP < 10 ms) Collector current Collector peak current (tP < 5ms) Base current Base peak current (tP < 5 ms) Total dissipation at Tc 25C Storage temperature Max. operating junction temperature 80 -65 to 150 150 850 450 V(BR)EBO 5 10 2 4 34 V V V A A A A W C C TO-220FP Unit
Table 3.
Thermal data
D2PAK
Symbol
Parameter
I2PAK TO-220
TO-220FP
Unit
Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient
__max __max
1.56 62.5
3.67 62.5
C/W C/W
3/15
Electrical characteristics
BUL49D - BULB49D
2
Electrical characteristics
(Tcase = 25C unless otherwise specified) Table 4.
Symbol ICES IEBO V(BR)EBO
Electrical characteristics
Parameter Collector cut-off current (VBE =0) Emitter cut-off current (IC =0) Emitter-base brakdown voltage (IC = 0) Test conditions VCE = 850 V VCE = 850 V VEB = 9 V IE =10 mA 10 450 _ IB =0.2 A IB =0.4 A IB =0.8 A _ IB =0.2 A _ IB =0.8 A VCE =5 V VCE =5 V VCE =10 V VBB= -2.5 V RBB =0 450 V 4 10 60 10 0.1 0.3 0.6 1.2 1 1.3 Tc = 125 C Min. Typ. Max. 100 500 100 18 Unit A A A V V V V V V V
Collector-emitter VCEO(sus)(1) sustaining voltage (I = 0) IC =10 mA B
(1)
VCE(sat)
Collector-emitter saturation voltage Base-emitter saturation voltage
IC =1 A IC =2 A
_ __
IC =4 A __ _ VBE(sat) (1) IC =1 A IC =4 A _ _
IC =10 mA hFE
(1)
DC current gain
IC =500 mA IC =7 A
VCEW
(1)
Maximum collectoremitter voltage without snubber Resistive load Storage time Fall time Inductive load Storage time Fall time Diode forward voltage
IC =8 A L =50 H tp =10 s VCC =250 V
IC =2 A 2 3 0.8 IC =4 A RBB(off) =0 L =1 mH 0.6 50 1.3 100 1.5 s ns V s s
ts tf
IB1=-IB2 =400 mA (see Figure 12) VCL =300 V IB(on) =800 mA VBE(off) =-5 V (see Figure 13) IC = 3 A
ts tf VF
1. Pulsed duration = 300 ms, duty cycle 1.5%
4/15
BUL49D - BULB49D
Electrical characteristics
2.1
Electrical characteristics (curves)
Figure 2. Safe operating area (for TO-220 - D2PAK - I2PAK) Figure 3. Safe operating area (for TO-220FP)
Figure 4.
Derating curves
Figure 5.
Output characteristics
Figure 6.
Collector-emitter saturation voltage
Figure 7.
Base-emitter saturation voltage
5/15
Electrical characteristics Figure 8. DC current gain Figure 9.
BUL49D - BULB49D DC current gain
Figure 10. Inductive load storage time
Figure 11. Inductive load fall time
Figure 12. Reverse biased safe operating area
6/15
BUL49D - BULB49D
Electrical characteristics
2.2
Test circuits
Figure 13. Resistive load switching test circuit
1) Fast electronic switch 2) Non-inductive resistor
Figure 14. Inductive load switching test circuit
1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier
7/15
Package mechanical data
BUL49D - BULB49D
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
8/15
BUL49D - BULB49D
Package mechanical data
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
9/15
Package mechanical data
BUL49D - BULB49D
TO-220FP mechanical data
Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 M in. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7
Dia
F1
D
F
G1 H
F2
L2 L5
E
123
L4
7012510-I
10/15
G
BUL49D - BULB49D
Package mechanical data
I˛PAK (TO-262) mechanical data
mm Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050
inch Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055
11/15
Package mechanical data
BUL49D - BULB49D
D˛PAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
12/15
BUL49D - BULB49D
Packaging information
4
Packaging information
D 2 P AK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13. 2 mm MIN. MAX . 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1. 65 11.4 4.8 3.9 11.9 1.9 50 0. 25 23. 7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5. 0 4. 1 12.1 2. 1 inch MIN. MAX. 0 .413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0 . 189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1. 5 7 4 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
13/15
Revision history
BUL49D - BULB49D
5
Revision history
Table 5.
Date 10-Sep-2003 04-May-2007 09-Jun-2008
Document revision history
Revision 1 2 3 First release. The document has been reformatted. Inser ted devices in: D2PAK and I2PAK. Changes
14/15
BUL49D - BULB49D
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
15/15
|
